If your drone loses signal, it should follow its failsafe, which is usually return-to-home (RTH). Keep the remote on, watch the drone, and take control if it heads toward an obstacle. The best preparation is to check your failsafe setting and RTH altitude before every flight.
What happens: failsafe options
DJI drones let you choose the failsafe action in DJI Fly:
- RTH is the default. The drone flies back to its recorded home point.
- Hover holds the drone in place.
- Land brings the drone down where it is.
RTH usually starts after several seconds without a signal. About 6 seconds is typical on many models, but the exact time varies.
RTH needs two things: a recorded home point, and a working GPS lock. Without them, the drone can’t navigate back.
Before every flight
- Set the RTH altitude above the tallest obstacles near your flight area. The return path is flown at that height, so a low setting can send the drone into trees or buildings.
- Confirm the home point is recorded before you take off.
- Check the failsafe action in the app, and make sure it’s the one you want.
If the link gets weak
Act quickly, but stay calm. These steps help in roughly this order:
- Turn toward the drone and move to a clearer spot, if you can do that safely.
- Point the remote’s antennas correctly. The flat faces of the antennas should face the drone. Don’t point the tips at it, because the signal is weakest off the ends.
- Reduce interference. Common sources are Wi-Fi on 2.4 or 5.8 GHz, power lines, cell towers, buildings, trees, and your own body blocking the remote.
- Gain altitude if it’s safe to do so, which can improve the line of sight.
- Press RTH while you still have a link, if the path home is clear.
Keep the remote switched on. The signal often reconnects as the drone returns, and turning the remote off and on can delay that reconnection.
Watch the return
Keep watching the drone during RTH. If it heads toward an obstacle or toward people, take control. Obstacle avoidance can be limited at night or in some directions, so don’t rely on it alone.
If the drone flies away
Start with Find My Drone in DJI Fly. It shows the drone’s last known position and can make the drone beep or flash its lights. In some apps, such as DJI Pilot, GS RTK and GS Pro, the option isn’t shown. In those apps, you can get the last known coordinates and enter them into a map app.
Check the flight log for the last recorded position. DJI says it stopped letting US users sync flight records to its servers in June 2024, so don’t count on the records being available later.
If you can’t find the drone, submit a flyaway report. DJI’s guidance says that producing a DJI Care Flyaway Aircraft Report stops the drone from taking off, even if someone else picks it up. If you have a DJI Care plan, check its flyaway terms before you produce a report, because some plans include flyaway coverage and replacement.
FPV drones
On FPV quads, set the failsafe in Betaflight. In a typical setup, the first stage holds the craft briefly, and the second stage cuts the throttle or uses GPS Rescue if you’ve configured it. Check the setting before you fly.
A buzzer or GPS module makes a downed quad much easier to find, especially in tall grass or woodland.
Reporting incidents
Part 107 pilots must report certain accidents to the FAA within 10 days. These include accidents involving serious injury or property damage over $500, not counting the drone. The FAA DroneZone guide explains where the report is filed.
Common misconceptions
- “Signal loss means a crash.” Failsafe RTH usually brings the drone back.
- “Turn the remote off and on to reset.” This can delay reconnection.
- “Pointing the antenna tips at the drone is best.” The flat faces of the antennas give the strongest signal.
- “Obstacle avoidance protects the return.” It can be limited at night or in some directions.
Safety
Watch the drone during RTH, and take control if it heads toward an obstacle or people. Set the RTH altitude above obstacles before each flight. For the landing on return, see how to land a drone safely.