Learning to Fly

Planning Drone Flight Paths and Waypoint Missions

Plan a drone flight path or waypoint mission: set points on a map, check altitude and battery margin, scout obstacles, and keep manual control ready.

On this page
  1. What a waypoint is
  2. Which drones support waypoints
  3. Planning apps
  4. Altitude: above takeoff, not ground
  5. Mapping and survey basics
  6. Battery, signal loss and the return
  7. Scout the route
  8. Airspace along the whole path
  9. Common misconceptions
  10. Safety

A waypoint mission is a route you set in advance, which the drone then flies on its own. Planned routes make repeatable shots possible, such as time-lapses and mapping passes. You still need to scout the route, check the battery margin and be ready to take manual control at any moment.

What a waypoint is

A waypoint is a point on the route with its own settings. Each one can store the altitude, speed, heading, gimbal tilt and an action, such as taking a photo. Saved missions can be repeated, which helps when you want the same shot on several days.

Which drones support waypoints

DJI Fly Waypoints, one of the DJI intelligent flight modes, are available on newer models, including the Mini 4 Pro, the Air 3 and Air 3S, and the Mavic 3 series. Support varies by model, and many older models don’t offer waypoints natively. The Mini 2 and Mini SE, for example, don’t. Check the app for your model before you plan a route you’re counting on.

Planning apps

  • DJI Fly Waypoints lets you set points on a map or by flying the route yourself.
  • Third-party apps include Litchi (paid, with a one-time fee), Dronelink, DroneDeploy and Pix4Dcapture. Support for a given DJI model varies by app.
  • Open-source autopilots such as ArduPilot and PX4 plan missions in Mission Planner or QGroundControl. These suit custom builds more than consumer camera drones. See Betaflight vs iNav for firmware that supports missions on a custom quad.

Whichever app you use, test the mission over an open area first, with a short route and a low altitude.

Altitude: above takeoff, not ground

Waypoint altitude is usually measured from the takeoff point, not from the ground under each waypoint. If the terrain rises, a route that looks safe on the map can take the drone into trees, hills or buildings. Terrain follow uses terrain data and sensors, and it isn’t available on all consumer models.

Mapping and survey basics

For mapping, a typical overlap is 70 to 80 percent between images in the direction of flight, and 60 to 70 percent between the flight lines. Flying lower gives finer ground detail, but it also means more images and longer missions. Choose the altitude to match the detail you need.

Battery, signal loss and the return

  • Plan the battery margin. Finish the mission with about 20 to 30 percent left.
  • Set the signal-loss action. Choose whether the drone should continue the mission or return home. The options vary by app and model. What to do if your drone loses signal explains the failsafe options in more detail.
  • Choose the corner style. In DJI Fly, curved transitions fly smoothly through points, while straight-line paths stop at each point.

Scout the route

Before you fly the mission, walk or drive the route and note trees, wires, towers and anything else that could be in the path. Obstacle avoidance may be off or limited during a mission, so don’t rely on it to protect the route.

Stay ready to take manual control or pause the mission at any time. Know how to do both on your app before you start.

Airspace along the whole path

Check airspace for every point on the route, not just the takeoff spot. In controlled airspace, you may need LAANC authorization for the area the route covers. In the US, a waypoint mission doesn’t change the basic rules: keep the drone in visual line of sight, and keep it below 400 feet (about 120 meters) above ground level. The FAA DroneZone guide explains the registration side.

Common misconceptions

  • “Waypoint missions are autonomous, so line-of-sight rules don’t apply.” In the US, visual line of sight still applies.
  • “Altitude is above the ground beneath the drone.” It is usually above the takeoff point.
  • “Every DJI drone supports waypoints.” Some models, including the Mini 2 and Mini SE, don’t support them natively.
  • “Obstacle avoidance protects the route.” It is often disabled or limited during missions.

Safety

Stay ready to take manual control. Keep the route away from people and roads, and stay below 400 feet (about 120 meters) in the US. If the drone heads toward an obstacle, pause the mission or take over.

The complete guide to learning to fly

How to Fly a Drone: Controls and Basic Movements
Read the guide

Keep exploring

Guides from other topics

All topics →