Calibrate your DJI drone’s compass only when the app asks you to, or when a compass warning persists. Calibrating before every flight does not help, and it can make readings worse. This guide covers when to calibrate, where to do it, and the steps for calibrating with the aircraft or the controller.
When you need to calibrate, and when you don’t
- Calibrate when the app prompts you, or when a compass error or interference warning persists.
- Calibrate after a big change in location, such as a long trip that changes your latitude, if the app suggests it.
- Do not calibrate before every flight. Frequent calibration is unnecessary and can make things worse.
Where to calibrate
- Choose an open outdoor area away from metal, cars, steel-reinforced concrete, power lines and underground pipes.
- Stay several metres away from parked cars and metal structures.
- Remove phones, keys and magnetic watches from your hands and pockets.
- Avoid calibrating indoors or on a metal roof, car roof or rebar deck. Those spots can give bad readings or false compass errors.
Calibrating with the aircraft
The menu path depends on the model and app version. In DJI Fly, one path runs from the settings menu through Safety and Sensors to Compass, then Calibrate. Look for the compass option if the path differs on your model.
- Horizontal rotation: Hold the aircraft level and rotate it slowly through 360 degrees until the app prompts the next step.
- Vertical rotation: Hold it vertically, nose down, and rotate it 360 degrees around its vertical axis.
- Watch the progress. The app shows an animation and progress. If the calibration fails, repeat it.
- Finish the calibration. Place the drone on the ground and wait for GPS. Confirm there are no compass warnings.
Slow, steady rotation works better than fast spinning.
Calibrating with the controller
DJI’s repair guidance also describes calibrating through the controller, using the RC Pro 2 or RC 2, or the RC Pro or RC. Follow the controller’s on-screen prompts. The steps are similar to the aircraft method: rotate horizontally, then vertically.
Older drones and LED codes
Older drones signal calibration with the status LED:
- Yellow: rotate horizontally
- Green: rotate vertically
- Flashing red: calibration failed
On DJI GO 4, the path is usually Aircraft settings, then Advanced, then Sensors, then Calibrate Compass.
If the warning comes back
- Do not take off with an unresolved compass error. Make the compass status part of your pre-flight checklist.
- Move to a different location and try again, away from metal and magnetic objects.
- Check your pockets for keys, phones and magnetic items.
- Check the flight logs if the problem continues. They can show which sensor reported the error. See how to find and read DJI flight logs.
Compass calibration versus IMU calibration
The compass and the IMU (inertial measurement unit) are calibrated separately. IMU calibration is done on a flat surface, and it can be done indoors. Compass calibration does not fix IMU or GPS errors.
Safety rules
- Never fly with an unresolved compass error. It can cause circular drift or a flyaway. Why your drone drifts covers the other causes of drift.
- Land immediately if the drone drifts in a circle after takeoff.
- After a firmware update, check for calibration prompts. See how to update DJI drone firmware safely.