Firmware updates fix bugs, improve flight performance and sometimes change safety features or no-fly-zone data, so it is worth installing them. The main risk is an interrupted update. Plan the update for a day before you need to fly, keep the drone still and powered, and do not skip the test hover afterwards.
Why firmware updates matter
- Bug fixes and performance: Updates correct problems found after release.
- Safety and airspace data: Updates can change no-fly-zone information, such as DJI GEO zones, and other safety features.
- Flight restrictions: Some models will not fly until the firmware is updated. Check this for your model.
Before you start
- Update the DJI Fly app first. Firmware often needs the latest app.
- Charge the aircraft and controller well. DJI’s minimum varies by model. Many guides suggest at least 50 percent.
- Use a stable internet connection. Downloads can be several hundred megabytes, and some are over 1 GB.
- Read the release notes. Some updates change features or settings.
- Choose a safe spot. Keep the drone indoors on a stable, flat surface during the update.
Update through the DJI Fly app
- Open DJI Fly and connect the drone to the controller.
- Look for the firmware update prompt on the main screen.
- Read the release notes.
- Tap Download, then Start Update when the download finishes.
- Keep the app open and follow the on-screen prompts.
- Let the aircraft restart. It may restart more than once.
Update through DJI Assistant 2
Use DJI Assistant 2 on a PC or Mac if the app does not show the prompt, or if the app update fails. It supports the Consumer Drones Series. Connect the drone to the computer with a USB cable, then follow the software’s firmware update prompts.
Controllers and batteries
Controller firmware, such as for the RC 2 or RC-N3, and goggles update separately. Each intelligent flight battery updates when you insert it and power it on. One battery update does not update the others, so check each battery you use.
After the update: check and test-hover
Look for calibration prompts, and follow them. Then hover at low height for one to two minutes, and watch the app for warnings before you land. If a compass prompt appears, see how to calibrate a DJI drone compass. Do not start a long flight straight after an update.
If the update fails
- Restart the drone, the controller and your phone.
- Retry the update in the DJI Fly app.
- If it still fails, use DJI Assistant 2 on a computer.
- If that also fails, contact DJI Support.
An interrupted update rarely damages a drone permanently, but it may need recovery through DJI Assistant 2. Keep the drone and the computer connected and powered until the process ends.
Common mistakes
- Updating just before a flight. Give yourself time for the test hover.
- Assuming one battery covers the rest. Each battery updates separately.
- Interrupting the update. Do not power off or close the app mid-update.
- Following old instructions. Many guides still describe the DJI GO app, which is for older drones. Newer drones use DJI Fly.
If you want to check the log after an update, see how to find and read DJI flight logs.