FAA Drone Rules

Does Your Drone Need Remote ID? Rules and Exemptions

Does your drone need Remote ID in the US? Yes if it must be registered. Learn the three ways to comply, the key dates, what is broadcast, and how to check.

On this page
  1. Quick answer
  2. Which drones need Remote ID
  3. Three ways to comply
  4. What Remote ID broadcasts, and what it does not
  5. How to check if your drone is compliant
  6. Adding your Remote ID serial number in DroneZone
  7. Key dates
  8. Who can see your information
  9. Penalties for flying without Remote ID
  10. Common misconceptions
  11. Quick checklist
  12. Related guides

Quick answer

Yes, if your drone must be registered. Remote ID applies to every drone that must be registered: recreational drones of 250 g (0.55 lb) or more, and all Part 107 drones, at any weight. A recreational drone under 250 g that is not registered does not need Remote ID.

Which drones need Remote ID

Situation Remote ID needed?
Recreational, under 250 g, not registered No
Recreational, 250 g or more Yes
Part 107 (business or commercial), any weight Yes
Recreational, flying only inside an FAA-Recognized Identification Area (FRIA) No Remote ID needed inside the FRIA, within visual line of sight

The Remote ID rule is in 14 CFR Part 89. See can I fly a drone under 250g for the weight limit.

Three ways to comply

1. Standard Remote ID. The broadcast is built into the drone. Most new models from major manufacturers have it. It broadcasts from takeoff to shutdown.

2. A broadcast module. This is an add-on unit for older drones. It is allowed only for flying within visual line of sight. A module must be an FAA-accepted one.

3. An FAA-Recognized Identification Area (FRIA). You can fly a drone without Remote ID only inside an FRIA, which is usually a designated club or educational field, and only within visual line of sight. The FAA has to recognise the area, and you must stay inside its boundaries.

Some older drones got Remote ID through firmware updates. Check with the manufacturer for your model.

What Remote ID broadcasts, and what it does not

For Standard Remote ID, the broadcast includes:

  • the drone’s serial number or a temporary session ID
  • the drone’s latitude, longitude and altitude
  • its speed and direction
  • the control station’s location and altitude
  • a time mark
  • an emergency status flag

A broadcast module sends the takeoff location instead of the control station location.

The broadcast uses Bluetooth or Wi-Fi. It does not need an internet or cellular connection.

Remote ID does not broadcast your name, home address or video.

How to check if your drone is compliant

  • Look for the label. A Standard Remote ID drone should carry a permanent label, usually on the body or battery compartment. It shows the Remote ID serial number.
  • Check the manufacturer. The product page or manual lists the compliance status for each model.
  • Check the FAA’s Declaration of Compliance list. It lists drones and broadcast modules that have been declared compliant. If your drone or module is on it, it is compliant.
  • Check your DroneZone record. If you have entered a Remote ID serial number, the record shows it.

Adding your Remote ID serial number in DroneZone

When you register, enter the Remote ID serial number for each drone or module in FAADroneZone. The Remote ID serial often differs from the airframe serial number. A module can be moved between drones if you update the registration. See FAA drone registration for the registration steps.

Key dates

  • September 2022: manufacturers had to build Standard Remote ID into new drones.
  • September 16, 2023: the operator compliance date.
  • March 16, 2024: FAA enforcement discretion ended, so Remote ID is enforced.

Who can see your information

Anyone with a compatible phone app can read the broadcast, which is how people check a drone flying over their home. They see the drone’s ID, position, altitude and takeoff or control station location. They cannot see the owner’s name or contact details. Only the FAA and law enforcement can link the broadcast to the registered owner.

Penalties for flying without Remote ID

If a drone must have Remote ID and does not, the FAA can impose civil penalties. Do not disable the broadcast. Flying with it switched off when it is required is a violation.

Common misconceptions

  • “Remote ID needs internet.” It is a broadcast. It does not need a connection.
  • “Sub-250 g drones never need Remote ID.” They do under Part 107.
  • “Remote ID streams my video or shares my name.” It sends position and ID data only.
  • “Any Bluetooth tracker works.” Only FAA-accepted modules count.

Quick checklist

  1. Is the drone registered? If yes, it needs Remote ID.
  2. Does your drone have Standard Remote ID, or do you need a module?
  3. Is the drone on the FAA’s Declaration of Compliance list, or does it have the label?
  4. Is the Remote ID serial entered in DroneZone?
  5. Is the broadcast switched on before every flight?

The complete guide to faa drone rules

FAA Part 107 Drone Rules Explained
Read the guide

Keep exploring

Guides from other topics

All topics →