The short answer
The four main types of UAV, sorted by how they are built and fly, are multirotor, fixed-wing, single-rotor (helicopter) and hybrid VTOL. Nearly all consumer drones are multirotors, usually quadcopters with four rotors. The other three types are used for longer-range, heavier or industrial work.
Multirotor
A multirotor has three or more rotors. It takes off and lands vertically, and it hovers easily, which makes it good for photography and close inspection. Quadcopters have four rotors, two spinning clockwise and two counterclockwise. Hexacopters and octocopters have six or eight.
Typical electric flight times are roughly 20 to 55 minutes. Examples include the DJI Mavic and Mini series, and nearly all the drones in this guide.
Fixed-wing
A fixed-wing drone looks like a small airplane. It needs a runway, a catapult or a hand launch to take off, and it cannot hover. What it gains is endurance: fixed-wing drones can stay aloft for hours and cover long distances, which makes them useful for mapping and surveying large areas. The senseFly and AgEagle eBee is a common example.
Single-rotor (helicopter)
A single-rotor drone has one main rotor and a tail rotor, like a helicopter. It is more efficient than a multirotor, can carry heavier payloads and often runs on gasoline. The large blades are a hazard, so these drones are used mainly in industry, such as agricultural spraying. The Yamaha FAZER is an example in agriculture.
Hybrid VTOL
A hybrid VTOL drone takes off vertically, like a multirotor, and then flies on fixed wings, like an airplane. It can cover long distances without a runway. The designs include tiltrotors, tailsitters and quadplanes. The WingtraOne is a tailsitter example, and Zipline’s P2 delivery drone is a hybrid.
Which type is a consumer drone?
Almost always a multirotor. A typical DJI camera drone, such as the Mini or Air series, is a quadcopter. The advantages are a small size, easy hovering and a low price. The disadvantages are short flight times and limited range compared with fixed-wing aircraft.
Other ways to classify drones
The four-type split is common, but it is not the only scheme:
- Military groups. The US Department of Defense uses Groups 1 to 5, based on weight, altitude and speed. Group 1 covers systems under 20 lb.
- NATO classes. Class I covers systems under 150 kg, Class II 150 to 600 kg, and Class III over 600 kg.
- Size and use. Consumer drones are often grouped as toy, micro, mini or camera drones.
- Autonomy. Drones are remotely piloted, semi-autonomous or fully autonomous.
These schemes are for industry and government. For a consumer, the useful split is by weight and by use. See how much drones weigh and carry for weight classes.
Drone, UAV or UAS?
A drone is a broad, everyday term for an unmanned vehicle, which can be aerial, ground-based or water-based. A UAV, or unmanned aerial vehicle, is the flying aircraft itself. A UAS, or unmanned aircraft system, is the full system, including the aircraft, the controller and the data link. The FAA uses the term UAS in its rules, including the Part 107 rules for commercial flying.
For buying a consumer drone, the four types matter less than weight, sensors and flight time. Read how to choose a drone for the decision, and the best drones for beginners for models to start with.